Hi there, today I will talk about what I have learnt from helping to fix the class printer which had become clogged from its nozzle to inside the extruder head. We began by removing the printer block which contains the extruder, the heating element, a fan and the nozzle.
The printer block is connected to the machine by a magnet and there is a ribbon that plugs into it which unclips easily. To access the extruder cog there is a number of small bolts which are removed using an allen key. Removing the nozzle from the block requires a small socket wrench which comes with the machine.
After trying to remove the nozzle and unclog it, we realised that it is much easier to do so when the block has been brought up to printing temperature which is 260 degrees Celsius. Once up to temperature we unscrewed the nozzle and ran a special piece of wire that has a rough surface inside it to clean it out. We also used a drill bit to clean out the extruder which worked quite well because turning the bit inside the head caught all the softened plastic and bought it out in one go.
How it became clogged in the first place is unknown, it may be the type of plastic or it may have been a breakage with the cord causing it to harden inside the block. What we have learnt from this is to stop trying to extrude it once there is a problem because it can cause the cord to start to clog the whole block once the nozzle has become blocked.
Tuesday, 27 May 2014
Sunday, 18 May 2014
Gears and constraints
Hello there, I have been looking into gears and how they relate to one another. After a few goes I have created a working set of three different size cogs. I then did a tutorial on rotation and transformation constraints that I found on youtube. Here is the link.
http://www.youtube.com/watch?v=j1WNbpX7HPo
What I learnt about making these cogs rotating together is that it's pretty simple to link a larger gear to a smaller one by using a rotation constraint and dialling back the influence of the smaller cog. This is where the number of teeth is important, to make gears run smoothly together they need to be in uniform ratios, I used a 50% ratio.
To make a smaller gear run off a larger one, you need to use a transformation constraint because the rotation constraint doesn't allow a rotation influence of more than one. The transformation constraint can also be used for location and scale restriction but also rotation. This way you tell the object how much it will rotate during a certain rotation of the target object. This rotation was 360 degrees was for the targets. Making an object rotate on a different plane involved using another feature of the transformation constraint which could tell the constrained object what rotation axis it would use for it's selected rotation. For example telling a cog on the x axis to use the z axis rotation of the target object as is desired rotation.
I had a little trouble with this feature in that it seemingly would only work for me one way and caused me to change my main cog to a y axis cog rather than the original z axis rotating cog. Here is how it turned out, I'm happy with how the gears mesh together, hopefully they will work in real life when I print them out.
http://www.youtube.com/watch?v=j1WNbpX7HPo
What I learnt about making these cogs rotating together is that it's pretty simple to link a larger gear to a smaller one by using a rotation constraint and dialling back the influence of the smaller cog. This is where the number of teeth is important, to make gears run smoothly together they need to be in uniform ratios, I used a 50% ratio.
To make a smaller gear run off a larger one, you need to use a transformation constraint because the rotation constraint doesn't allow a rotation influence of more than one. The transformation constraint can also be used for location and scale restriction but also rotation. This way you tell the object how much it will rotate during a certain rotation of the target object. This rotation was 360 degrees was for the targets. Making an object rotate on a different plane involved using another feature of the transformation constraint which could tell the constrained object what rotation axis it would use for it's selected rotation. For example telling a cog on the x axis to use the z axis rotation of the target object as is desired rotation.
I had a little trouble with this feature in that it seemingly would only work for me one way and caused me to change my main cog to a y axis cog rather than the original z axis rotating cog. Here is how it turned out, I'm happy with how the gears mesh together, hopefully they will work in real life when I print them out.
Sunday, 11 May 2014
Gears - Learning to build
Hello there, I did a quick tutorial on how to model gears in blender. It was pretty easy, the next step is learning to give them relational functionality. I found a good tutorial on how to add constraints and make the rotate together as well as defining ratios. That will be the next step. Here is the link for the gear build tutorial.
http://glupor.blogspot.com.au/2012/06/blender-tutorial-1-making-cogs.html
Here is an image of the cogs I built.
http://glupor.blogspot.com.au/2012/06/blender-tutorial-1-making-cogs.html
Here is an image of the cogs I built.
Saturday, 3 May 2014
Here is a little video of the walk cycle I did as a tutorial. This was quite straight forward to learn, it dealt with manipulating a rig into four different positions and inserting a keyframe for each one in the timeline. By pressing the I key the position of the selected parts become a key frame and will always move to that position at that time. It is a good idea to have everything selected on your model when making a keyframe for an organic object because other parts may move slightly as well.
The other part of the tutorial was making the model walk along a path rather than walking in place. by going into the NLA editor I was able to combine both the motions of walking and moving on a path to make the model walk along. This makes life easier, by being able to loop the walk cycle and just move it around it saves alot of time that would be spent making keyframes. The graph editor was able to change the velocity of movement to a constant rate by making it a vector line after pressing the key V.
The other part of the tutorial was making the model walk along a path rather than walking in place. by going into the NLA editor I was able to combine both the motions of walking and moving on a path to make the model walk along. This makes life easier, by being able to loop the walk cycle and just move it around it saves alot of time that would be spent making keyframes. The graph editor was able to change the velocity of movement to a constant rate by making it a vector line after pressing the key V.
Saturday, 26 April 2014
Using the Skin Modifier
Hello there, I have done a tutorial which focused on using the Skin Modifier. This seems like a really helpful tool to create figures with amateurs that then can be sculpted into the final shape.
Here is the link for the tutorial.
http://www.blendtuts.com/skin_modifier_04_09_2012
This modifier creates a mesh over a stick figure design enabling you to create complex shapes without having to physically place every vertices. The features of the Skin Modifier include the option to mark loose which means that the veritices selected don't affect topography of the mesh. This is what I did for the collar and hip vertices. Another option is to mark root. This option defines where the mesh radiates from as well as the spot where the armature will be generated. Equalise radi is an option which smooths out the mesh around the branches of your framework.
A really handy part of this modifier is the create armature feature. This takes the framework of your object and turns it into bones that are already connected and parented. Once you apply the modifier the mesh will respond to any movements in the frame accordingly in pose mode.
As you can see, I took a screen shot with the armature visible to help illustrate the relationship between mesh and frame. It's pretty rough but the purpose of this tutorial was to come to grips with this modifier. The next step would be to use the sculpt tool to create your finished model.
As part of this tutorial I used the Mulitresolution Modifier which smoothed out the mesh alot like the Subdivision Modifier except it allows you to manipulate subdivided vertices when sculpting.
Here is the link for the tutorial.
http://www.blendtuts.com/skin_modifier_04_09_2012
This modifier creates a mesh over a stick figure design enabling you to create complex shapes without having to physically place every vertices. The features of the Skin Modifier include the option to mark loose which means that the veritices selected don't affect topography of the mesh. This is what I did for the collar and hip vertices. Another option is to mark root. This option defines where the mesh radiates from as well as the spot where the armature will be generated. Equalise radi is an option which smooths out the mesh around the branches of your framework.
A really handy part of this modifier is the create armature feature. This takes the framework of your object and turns it into bones that are already connected and parented. Once you apply the modifier the mesh will respond to any movements in the frame accordingly in pose mode.
As you can see, I took a screen shot with the armature visible to help illustrate the relationship between mesh and frame. It's pretty rough but the purpose of this tutorial was to come to grips with this modifier. The next step would be to use the sculpt tool to create your finished model.
As part of this tutorial I used the Mulitresolution Modifier which smoothed out the mesh alot like the Subdivision Modifier except it allows you to manipulate subdivided vertices when sculpting.
Monday, 21 April 2014
Nut and bolt tutorial part 2
This tutorial took me to new places on Blender, namely the node edit mode. There are a ridiculous amount of options to choose from in there. I think the challenge is using the right one to get the effect you want. I also learnt how to easily make metallic textures using only a texture mode in the options when making a new texture.
Making the bolt itself was straightforward, the tutorial focused on texturing, lighting and effects. The main lesson I will take away is how to use those nodes to manipulate the balance and texture of an object. This is the link below.
http://www.blendtuts.com/nut_bolt_part2
Making the bolt itself was straightforward, the tutorial focused on texturing, lighting and effects. The main lesson I will take away is how to use those nodes to manipulate the balance and texture of an object. This is the link below.
http://www.blendtuts.com/nut_bolt_part2
Wednesday, 16 April 2014
Nuts and bolts tutorial part 1
Hello, I've chosen this tutorial because it is creating a more technical object than artistic and is a good way to learn some more techniques and tips on shortcuts. Here is the link below.
http://www.blendtuts.com/nut_bolt_part1
There are a few things I've learnt from this tutorial, the first is the loop cut shortcut Ctrl+r. This is a handy way to put a seam into any object and you can increase the number of cuts you can make by using the mouse wheel. Another thing is insetting. By pressing i on the keyboard with a face selected it will create faces around the edge of the plane as well as one in the middle. This is a good way to make holes in objects of pull the middle out or in.
Selecting a loop of edges or faces is made easy by holding the Alt and right clicking on an edge that makes part of a loop. This is much easier than trying to pick out a line of vertices in a complicated model. Especially in wireframe mode.
Making this model required some subdivision of surfaces. Pressing the w key will open the subdivision menu which gives many options. Another handy trick if you need to do the same action multiple times is the Shift+r function which repeats the last action you took when you have selected another area.
Here is a picture of my efforts from part one.
There's something weird going on with the surface, I don't know what that is but hopefully it will fix itself when I get to texturing and rendering the nuts in part two.
Subscribe to:
Posts (Atom)



